I probably should RTFM first... as i do not see any sleep mode. The only interface i am using is the built in http server with the Administrator user.
I have now set the interface from auto negotiation to fixed 100 full duplex... But i doubt this will change anything, as Ethernet connectivity is always there. The thing which stops working, is the IP connectivity.
IP layer is over Ethernet... So before you can access an IP on a local network, you have to ask for the corresponding MAC addr. of the device. This part is working... The BizHub always sends an ARP response, however an ICMP Echo request (Ping), or TCP/9100, or TCP/80, ... is not answering at all == connection times out.
BTW here are the SW versions:
Code:
ROM Version |
MFP Controller BOOT Program |
4038-1E00-G00-03-000(00) |
MFP Controller SubSet Program |
4038-1F00-G00-16-000(00) |
MFP Controller |
4038-0100-G00-K0-000(00) |
Operation PANEL Message Data |
4038-8100-G00-J2-000 |
FAX Board Controller1 |
|
FAX Board Controller2 |
|
IR |
4038-0023-G00-13-000 |
PRT |
4038-0050-G10-05-000 |
ADF |
4582-24G0-08-00 |
Finisher |
|
System Controller |
4038-1000-G00-K0-000(00) |
Printer Controller |
4038-3000-G00-55-000(00) |
Printer Controller-Font |
4038-3F00-G00-24-000(00) |
Printer Controller-Demo Page |
4037-3E00-G00-00-000 |
MIO |
4038-5000-G00-63-000(00) |
PSWC |
4038-5100-G00-77-000(00) |
MIB IF |
4038-5200-G00-26-000(00) |
IPP IF |
4038-5300-G00-03-000(00) |
TCP/Socket |
4038-6300-G00-06-000(00) |
Open API |
4038-7000-G00-86-000(00) |
Operation PANEL |
4038-8000-G00-E0-000(00) |
CSRC |
4038-8300-G00-03-000(00) |
PIC |
4038-8200-G00-18-000 |
Bookmarks