Biz 361 firmware, last version?? Anyone know, or have? PM ME!

[mjunkaged]

I need highest version (I have 11 and 13, I think) USB firmware files for the 361, I don't have the version I need, I don't think. Still have corrupted admin password reset screen. No known previous password works.
Even if you don't have the files, if you know the name of the file, and/or file name in 'mfp controller' folder, it would help me know at least what I'm looking for!!
I can no longer get dealer support for it, it's too old.
As usual, thanks in advance for HELPFUL replies or PMs!!

[907tec]

This is the latest and greatest...from April of '10:


Product Name: bizhub 501/421/361
MFP controller mass-production program Ver.21-G00 / Image controller mass-production program Ver.15-G00
Subject: [US] [MFP FW Ver.21-G00 / Image FW Ver.15-G00] Release of mass-production program.

That work for you?

[mjunkaged]

This is the latest and greatest...from April of '10:


Product Name: bizhub 501/421/361
MFP controller mass-production program Ver.21-G00 / Image controller mass-production program Ver.15-G00
Subject: [US] [MFP FW Ver.21-G00 / Image FW Ver.15-G00] Release of mass-production program.

That work for you?

Close, now I know what versions exist, but not the file names.....I need the stuff after the 'm1g' in mfp controller, or filename of USB firmware exe. for each version; for example I know I have: v.20 GCX, and mfp controller filename ends in: m1g2000d0 (as does install file). So, what v.# is m1g200000? How about 110000? I think that one is v.11 maybe, but not 100% sure. I don't believe I ever had 15 TBH, unless it's one of the above?

[907tec]

Here's the FW Notes from that Ver21 file:

[Release version]bizhub501/421/361: MFP controller mass-production program Ver.21-G00 (Based Version: Ver.20-G00)
bizhub501: Image controller mass-production program Ver.15-G00 (Based Version: Ver.11-G00)
bizhub421: Image controller mass-production program Ver.15-G00 (Based Version: Ver.11-G00)
bizhub361: Image controller mass-production program Ver.15-G00 (Based Version: Ver.11-G00)
[Download file name]-
501us_m1g2100.exe (Self-extracting compressed file)-
421us_m1g2100.exe (Self-extracting compressed file)-
361us_m1g2100.exe (Self-extracting compressed file)

[361US] - bizhub361-
MFP_controller:
A0R7011m1g210000.bin
A0R7011m1g210000.sum-
Operation_message none
Image_controller:
A0R7011m1g210000.bin
A0R7011m1g210000.sum-
Df_controller:
none
Finisher_controller:
none
Fax_controller:
15la000x1g120002.bin
15la000x1g120002.sum

DLBT1000698EN00.pdf

[mjunkaged]

VERY NICE! Thainks, and long time no see....glad to see you're still active.

[907tec]

Same to you, buddy. Let me know if you need any of those files.

[mjunkaged]

Same to you, buddy. Let me know if you need any of those files.

Is v.21 small enough to email me? Doubt it.... PM me if you've deleted me addy. Would I need 15 for anything? I know I want last/latest.

[mjunkaged]

Wait, I already have that file, 907, but thanks for clearing the confusion......that seemingly unimportant .doc file that goes with these is actually somewhat important if you need more than just latest ver. is what I've learned. OOPS! Thankfully not everyone skipped/deleted them.
......Am I correct, that there is no USB v.13, and it's only the CF card image creator exe file?