Can't set black over 100 (error: value must be between 0-100)
No yellow spots on word document
6.jpg
I'd like to think it was just an Adobe issue but the fact that it prints perfectly to a C552 is puzzling.
Can't set black over 100 (error: value must be between 0-100)
No yellow spots on word document
6.jpg
I'd like to think it was just an Adobe issue but the fact that it prints perfectly to a C552 is puzzling.
Last edited by captainrva; 01-09-2019 at 08:08 PM.
Those yellow spots are likely hidden machine identifiers.
Machine Identification Code - Wikipedia
Oh, I see, it says "Enhanced Security" at the top...I don't see the Engine FW dipswitch though.
20190109_161936.jpg
I guess the FW dipswitch doesn't really matter too much because I don't see these settings changing the Post Script drivers threshold any.
Last edited by captainrva; 01-09-2019 at 09:39 PM.
I was able to get around this issue with the PS driver but I had to export to b&w pdf's, open in photoshop as grayscale, save and then place each page back into a new indesign document and then paste in the color page. Just doesn't make sense why it works fine on older machines.
Does just a standard .txt document file with black text count a black click correctly??? If so, it sounds like it boils down to Adobe and how color space is managed and passed on to the driver and therefore counted. I had a similar issue at a lawyer's office that was using Wordperfect...the software actually overrode the print driver, so even if the system default was black, the Wordperfect setting for color actually overrode the system driver default!!! ANNOYING!!!
Sent from my SM-N950U1 using Tapatalk
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
I have been working with the Adobe community to try to resolve this as well and the conclusion there is that the Print Driver/Printer is converting the black to 4 color. I Can do Output previews and it shows as pure black and no CMY at all but if I hit print....Color click under auto color. I started a ticket with Konica last week so I will follow up with that today.
black.jpg
Note: I am now testing this on a C658 and having the exact same issue.
Last edited by captainrva; 01-15-2019 at 07:19 PM.
Bookmarks