Need help on a bizhub 808 machine that shows white specks on print. See attached demo page. I've replaced the drum unit already, but the issue was not resolved.
Thanks for the help.
Thanks: 0
Likes: 0
Dislikes: 0
Need help on a bizhub 808 machine that shows white specks on print. See attached demo page. I've replaced the drum unit already, but the issue was not resolved.
Thanks for the help.
It could be environmental. First try adjusting first and second transfer current to see if there is any improvement.
Is this machine just out of the box?
Else replace dev to test.
Whatever
Setup of machine complete?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Reply With Quote
Bookmarks