Thanks:
0
Likes:
0
Dislikes:
0
-
Re: PM COUNTER Konica minolta xx4 e cxx4 series
On the 4e series consumables like drums, transferbelt, fuser etc are set to display end of life messages by default and continue to run without shut down. We usually turn off the end of life messages to display during setup. The only thing that will still display end of life messages is the transfer roller and toner and ozone filters, but these can easily be reset. On the older earlier 4 series this is not the case and the machine will shut down when end of life is reached, you will have to use the software switches to disable the notifications and allow the machine to continue to run - found out the hard way about that one.
There are custom PM counters in the service mode that can be setup but I have never messed with those.
-
Re: PM COUNTER Konica minolta xx4 e cxx4 series
Reminds me of the old key counters customers would plug in to unlock copier. Once they used the set amount copier could not be used again until the purchased more.
Almost sounds like this is what OP is trying to force. Don't pay and your copier is disabled
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks