Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    BH C258 not toning up K

    ive replaced the toner motor assembly,watched the toner bottle turn,
    any idea's

  2. #2
    Master Of The Obvious 10,000+ Posts
    BH C258 not toning up K

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: BH C258 not toning up K

    I haven't had those particular hoppers apart, but the 364e hoppers were well know for packing toner into the bushings, so the hopper mechanics would just vibrate, never turning. If it's the same there is a white bushing on the front of each hopper that can be easily removed, then vacuumed out or picking out the chunks. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 10,000+ Posts
    BH C258 not toning up K

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,786
    Rep Power
    661

    Re: BH C258 not toning up K

    Quote Originally Posted by digicor View Post
    ive replaced the toner motor assembly,watched the toner bottle turn,
    any idea's
    clogged supply lines?

  4. #4
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: BH C258 not toning up K

    i saw the white bushing, i didnt want to pry it off, not knowing if it was going to break, ill address it and see if that does it, thanks

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    828
    Rep Power
    50

    Re: BH C258 not toning up K

    I had a c458 today doing this on black.

    It turned out to be the drum.

    I could see a mist of toner on the drum surface which I figured was enough to use up what the hopper was putting in.

    On replacing the drum it rapidly toned up to about 7% and held there afterwards.

    The only thing that bothers me was the fact that the drum was replaced only two days ago so was obviously faulty from new....

  6. #6
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,143
    Rep Power
    346

    Re: BH C258 not toning up K

    Quote Originally Posted by digicor View Post
    ive replaced the toner motor assembly,watched the toner bottle turn,
    any idea's
    There are toner cartridge motor and toner supply motor, which one you replaced?
    Did you check by turning gears manually that developing roller is turning?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  7. #7
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: BH C258 not toning up K

    i replaced the toner cartridge assembly motor system

  8. #8
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,143
    Rep Power
    346

    Re: BH C258 not toning up K

    Quote Originally Posted by digicor View Post
    i replaced the toner cartridge assembly motor system
    Is this assembly include both motors(M6 and M25)?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  9. #9
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: BH C258 not toning up K

    it the one in the back of the machine it has all 4 toner bottle motors together as one unit

  10. #10
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,143
    Rep Power
    346

    Re: BH C258 not toning up K

    Now you have black toner in hopper but it's driven by another motor-toner supply motor, so your toner is only moving half way towards Developer unit.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here