Thanks: 
Likes: Have had a couple of dev units cause this in the past.
Dislikes: 0
Have had a couple of dev units cause this in the past.
Purchased New developer unit (Black one) Changed and the same problem again. Now a bit confused ... :/ Attachment 41764Attachment 41764
Maybe i cant see good but in first post i can see white void areas and on the last sample it looks like magenta areas on black ...?
What interval does it repeat? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
looks to me the defect pattern has changed and I agree now a magenta tint.Originally Posted by giogio80
did you init the dev unit properly?
and the calibration? was made?
You have never mentioned if you are feeding the paper LEF or SEF.
I would assume lef looking at the defect
Well, you know what "assume" does Phil. Makes an "ass" of "u" and "me". Lol
Information given can be cryptic. So not the drums and not the dev tank on K and yellow and magenta does not show problems so not the transfer.
That leaves the laser unit?
Whatever
Posting Permissions
Reply With Quote
Bookmarks