Dislikes: 0
Hello.
Just received a brand new drum units and changed that. Transfer Belt is also changed and good, but still keeps printing stripes on the solid color. shuffling color drums but no reaction only Cyan and Black makes stripes. Please help if somebody had such experience. I think Developer unit is not so bad as well. Please help!!!
Here are photos
You have swapped drum units but the problem is still there. So issue is not with the drum units. It is cleared.
Now come to the second point which is Transfer belt, you have replaced transfer belt unit and it is good. when it is new it would be best. You didn't attach snapshot of transfer belt unit's life. Problem can be with black and cyan transfer rollers inside transfer belt. High voltage unit can also be the cause of this problem.
3rd point is Developing units if you have checked them, brush OK? "K" DV unit life is expired almost, but this is not the reason.
I would check first developing units and developing rolers for cyan and black color.
Yep, looks like uneven pitch at 28 mm intervals. Definitely developing units.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Like they said: developing units. OEM supplies? =^..^=Originally Posted by tsbservice
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
would be looking at the drive system for those developers.
Can I buy Roller only for developer unit?? because entire developer unit is not cheap. and if yes please can anyone give me proper part numbers for that DV313C and DV313K units ???
As far as i know you cannot buy developing roller only. Its whole developing unit as you know it. There is no part number for this single part. You can take it from old developing units if you do not want to purchase new.
If you want cheap you're in the wrong business. Or least sell Kyocera and it'll be under warranty.
You never mentioned if you tried cleaning the printhead.
Posting Permissions
Thanks: 
Likes: 
Reply With Quote
Bookmarks