Originally Posted by
ppdmike
Looking for some suggestions with a KM Pro 1052. It decided not to come to ready one day last week and no matter what we've tried, no change. So far AC board, PRCB, Image process board and fuser have all been tried on another machine, all fine. New OACB ordered and fitted, no difference. Just won't progress past initial start up and says "now correcting" . Tried taking connectors off the PRCB one by one and restarting but nothing obvious. Fuser doesn't react, drum blade setting won't complete and all this with no fault codes. Any ideas?
Bookmarks