Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 250+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    283
    Rep Power
    33

    Bizhub 920 strange Jamming Tray 3 duplex

    Hi there,
    This old 920 with more than 10 mil counts and still working as a stallion got and interesting problem. The customer called in for paper jamming from tray 3. On my visit this revealed, every thing is fine on single side feeding from tray 3. When try duplex printing for more than 5 prints A4, it gives away J17-01. There are 2 sheets stuck in registration assembly, that are 5th and 6th sheets altogether. Further detailed inspections revealed, in duplex command, the 6th sheet comes out of tray 3 early, while the 1st sheet is under ADU exit. It supposed to print all first 5 sheets and the 6th supposed to be fed after the 5th sheet enters registration from ADU exit.
    The problem is only occurring in A4 all other sizes and orientations work fine.
    Seems to me a software glitch, any advise before going on....

  2. #2
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: Bizhub 920 strange Jamming Tray 3 duplex

    Does the other trays jam?
    Whatever

  3. #3
    Senior Tech 100+ Posts escalante's Avatar
    Join Date
    Sep 2018
    Location
    Miami
    Posts
    115
    Rep Power
    13

    Re: Bizhub 920 strange Jamming Tray 3 duplex

    Very good days. I hope this image helps you. if not to edit it in PDF

    Enviado desde mi SM-J701M mediante Tapatalk

  4. #4
    Senior Tech 250+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    283
    Rep Power
    33

    Re: Bizhub 920 strange Jamming Tray 3 duplex

    For Allan:
    Other trays work fine.

    For Escalante:
    Already done that.

    Please note: Only tray 3 is problematic in duplex on A4 size only. Single side copies are all OK.

    Older Gurus....Awaiting

  5. #5
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: Bizhub 920 strange Jamming Tray 3 duplex

    Did you do your home work researching this great site?
    Nope, OK no problem I will do that for you, hope it will help:
    920 gives J1701 on Tray3 only
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  6. #6
    Senior Tech 250+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    283
    Rep Power
    33

    Re: Bizhub 920 strange Jamming Tray 3 duplex

    Quote Originally Posted by tsbservice View Post
    Did you do your home work researching this great site?
    Nope, OK no problem I will do that for you, hope it will help:
    920 gives J1701 on Tray3 only
    Yes already done that....the problem is toooo specific...NO problem in any other trays also in Tray3 unless we put A4 paper in it. The problem seems to me a software glitch i.e. when give command for more than 5 prints, duplex on A4 size, it gives away J17-01 on very first cycle and only in this specific condition of duplex prints A4 and more than 5 multipprint job. 5 or less prints no problem at all, single side no problem at all.
    This machine rotates 5 papers in one copy cycle in multicopy mode. When the 5th sheet is fed from duplex to registration the 6th paper is fed from tray. In my case, it seems, the the 6th sheet is fed without any delay just after 5th sheet is fed...while the first sheet is ready to enter the registration from ADU. The 5th and 6th sheets are jammed in registration on another with merely an inch apart from each other. No issue of double roller... I want to factory reset the machine but need any expert advise before doing that.
    I hop you all understand the problem of the machine OR NOT....

  7. #7
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: Bizhub 920 strange Jamming Tray 3 duplex

    Try the feed rollers as per suggestion.
    Not sure about the 920 but on the 751 there was a setting for duplex loop adjust under machine in service mode that work for me one those models.
    Whatever

  8. #8
    Field Supervisor 500+ Posts
    Bizhub 920 strange Jamming Tray 3 duplex


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    912
    Rep Power
    42

    Re: Bizhub 920 strange Jamming Tray 3 duplex

    Any shot you tried different paper?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here