Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Junior Member
    Join Date
    Dec 2017
    Posts
    5
    Rep Power
    0

    Error code C-5106 on Bizhub C8000

    I have the error code C-5106 on C8000. The technical manual tell about "Main body: Fusing control circuit initial communication abnormality".
    I followed the instructions in the manual by changing the cards " Conveyance drive board (CDB) Printer control board (PRCB) DC power supply /1 (DCPS/1)". But the error code is always present. Someone can help me please

  2. #2
    Senior Member
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    40
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    Is the fuser lamps lighting up?
    Is the machine staying on warming up or Adjusting?
    Please check the ADU lock lever sensor it gets soiled with toner or remove actuator.

  3. #3
    Junior Member
    Join Date
    Dec 2017
    Posts
    5
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    Thank you Beronf for answering me. the error code comes as soon as I turn on the machine. so I can not see if the lights come on or not and not know if the lamps heats. please, can you tell me where ADU lock lever sensor is? Regards

  4. #4
    Service Manager 1,000+ Posts
    Error code C-5106 on Bizhub C8000

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,110
    Rep Power
    43

    Re: Error code C-5106 on Bizhub C8000

    sw3-bit1-0?

  5. #5
    Junior Member
    Join Date
    Dec 2017
    Posts
    5
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    Quote Originally Posted by Synthohol View Post
    sw3-bit1-0?
    Dipsw 3-1 is set to 0

  6. #6
    Service Manager 1,000+ Posts
    Error code C-5106 on Bizhub C8000

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,110
    Rep Power
    43

    Re: Error code C-5106 on Bizhub C8000

    Workaround/Fix
    C-5106 is a Main body Fusing control circuit initial communication abnormality. To troubleshoot:
    1. Check the connection of the following connectors and the wiring between connectors. If any problem is found, correct it.

    • CN57 (DC Power supply /1)
    • CN642 (pantograph)
    • CN643 (pantograph)
    • CN632 (pantograph)
    • CN638 (pantograph)
    • CN300 (Conveyance drive board)
    • CN301 (Conveyance drive board)
    • CN150 (Printer control board)

    2. Check wiring for a pinch under the developing tools cover if problem occurs after developer charge. An ICP may NOT be OPEN.
    3. Check if ICP 16 on the Conveyance drive board (p/n A1RF H060 ) or ICP 23 on the Printer control board (p/n A1RF H050 ) is OPEN. If so, replace the problem board.
    4. If the cause could not be specified by the above steps, replace the parts in the following order.

    • Conveyance drive board
    • Printer control board
    • DC Power supply /1 (p/n A1RF M401 01)
    • Wiring (p/n A1RF N205 00)

    IMPORTANT: Please check the wiring harness(es) by unplugging all associated connectors, checking all wires to ground (for a short) and checking continuity of the wiring (for an open).

  7. #7
    Junior Member
    Join Date
    Dec 2017
    Posts
    5
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    Quote Originally Posted by Synthohol View Post
    Workaround/Fix
    C-5106 is a Main body Fusing control circuit initial communication abnormality. To troubleshoot:
    1. Check the connection of the following connectors and the wiring between connectors. If any problem is found, correct it.

    • CN57 (DC Power supply /1)
    • CN642 (pantograph)
    • CN643 (pantograph)
    • CN632 (pantograph)
    • CN638 (pantograph)
    • CN300 (Conveyance drive board)
    • CN301 (Conveyance drive board)
    • CN150 (Printer control board)

    2. Check wiring for a pinch under the developing tools cover if problem occurs after developer charge. An ICP may NOT be OPEN.
    3. Check if ICP 16 on the Conveyance drive board (p/n A1RF H060 ) or ICP 23 on the Printer control board (p/n A1RF H050 ) is OPEN. If so, replace the problem board.
    4. If the cause could not be specified by the above steps, replace the parts in the following order.

    • Conveyance drive board
    • Printer control board
    • DC Power supply /1 (p/n A1RF M401 01)
    • Wiring (p/n A1RF N205 00)

    IMPORTANT: Please check the wiring harness(es) by unplugging all associated connectors, checking all wires to ground (for a short) and checking continuity of the wiring (for an open).
    Thanks Synthohol for your availability.
    I have already changed the cards
    • Conveyance drive board
    • Printer control board
    • DC Power supply /1 (p/n A1RF M401 01)

    and I have the same error code.
    but when I unplug the ADU conveyance motor M39, the error code C-5106 disappears. On the other hand when I run an impression, I have a jam just before the 2nd transfer and the code C-E006 appears. After restarting of machine, code C-5106 returned.
    NB: The ADU conveyance motor M39 engine was also changed

    Regards

  8. #8
    Technician
    Join Date
    Jun 2017
    Location
    Lima
    Posts
    10
    Rep Power
    5

    Thumbs up Re: Error code C-5106 on Bizhub C8000

    Quote Originally Posted by jiceys View Post
    I have the error code C-5106 on C8000. The technical manual tell about "Main body: Fusing control circuit initial communication abnormality".
    I followed the instructions in the manual by changing the cards " Conveyance drive board (CDB) Printer control board (PRCB) DC power supply /1 (DCPS/1)". But the error code is always present. Someone can help me please


    I hope this list of ICPs will serve you.


    Greetings.
    Attached Files Attached Files

  9. #9
    Trusted Tech 50+ Posts
    Error code C-5106 on Bizhub C8000


    Join Date
    Sep 2017
    Location
    Chula Vista
    Posts
    89
    Rep Power
    4

    Re: Error code C-5106 on Bizhub C8000

    I have the same issue on a C-1100 . Any update on this problem? I have changed or tested just about everything listed here.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •