Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Dec 2017
    Posts
    9
    Rep Power
    0

    Error code C-5106 on Bizhub C8000

    I have the error code C-5106 on C8000. The technical manual tell about "Main body: Fusing control circuit initial communication abnormality".
    I followed the instructions in the manual by changing the cards " • Conveyance drive board (CDB) • Printer control board (PRCB) • DC power supply /1 (DCPS/1)". But the error code is always present. Someone can help me please

  2. #2
    Senior Member 100+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    109
    Rep Power
    16

    Re: Error code C-5106 on Bizhub C8000

    Is the fuser lamps lighting up?
    Is the machine staying on warming up or Adjusting?
    Please check the ADU lock lever sensor it gets soiled with toner or remove actuator.

  3. #3
    Junior Member
    Join Date
    Dec 2017
    Posts
    9
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    Thank you Beronf for answering me. the error code comes as soon as I turn on the machine. so I can not see if the lights come on or not and not know if the lamps heats. please, can you tell me where ADU lock lever sensor is? Regards

  4. #4
    Certified Konica Expert 2,500+ Posts
    Error code C-5106 on Bizhub C8000

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,914
    Rep Power
    216

    Re: Error code C-5106 on Bizhub C8000

    sw3-bit1-0?
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  5. #5
    Junior Member
    Join Date
    Dec 2017
    Posts
    9
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    Quote Originally Posted by Synthohol View Post
    sw3-bit1-0?
    Dipsw 3-1 is set to 0

  6. #6
    Certified Konica Expert 2,500+ Posts
    Error code C-5106 on Bizhub C8000

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,914
    Rep Power
    216

    Re: Error code C-5106 on Bizhub C8000

    Workaround/Fix
    C-5106 is a Main body Fusing control circuit initial communication abnormality. To troubleshoot:
    1. Check the connection of the following connectors and the wiring between connectors. If any problem is found, correct it.

    • CN57 (DC Power supply /1)
    • CN642 (pantograph)
    • CN643 (pantograph)
    • CN632 (pantograph)
    • CN638 (pantograph)
    • CN300 (Conveyance drive board)
    • CN301 (Conveyance drive board)
    • CN150 (Printer control board)

    2. Check wiring for a pinch under the developing tools cover if problem occurs after developer charge. An ICP may NOT be OPEN.
    3. Check if ICP 16 on the Conveyance drive board (p/n A1RF H060 ) or ICP 23 on the Printer control board (p/n A1RF H050 ) is OPEN. If so, replace the problem board.
    4. If the cause could not be specified by the above steps, replace the parts in the following order.

    • Conveyance drive board
    • Printer control board
    • DC Power supply /1 (p/n A1RF M401 01)
    • Wiring (p/n A1RF N205 00)

    IMPORTANT: Please check the wiring harness(es) by unplugging all associated connectors, checking all wires to ground (for a short) and checking continuity of the wiring (for an open).
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  7. #7
    Junior Member
    Join Date
    Dec 2017
    Posts
    9
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    Quote Originally Posted by Synthohol View Post
    Workaround/Fix
    C-5106 is a Main body Fusing control circuit initial communication abnormality. To troubleshoot:
    1. Check the connection of the following connectors and the wiring between connectors. If any problem is found, correct it.

    • CN57 (DC Power supply /1)
    • CN642 (pantograph)
    • CN643 (pantograph)
    • CN632 (pantograph)
    • CN638 (pantograph)
    • CN300 (Conveyance drive board)
    • CN301 (Conveyance drive board)
    • CN150 (Printer control board)

    2. Check wiring for a pinch under the developing tools cover if problem occurs after developer charge. An ICP may NOT be OPEN.
    3. Check if ICP 16 on the Conveyance drive board (p/n A1RF H060 ) or ICP 23 on the Printer control board (p/n A1RF H050 ) is OPEN. If so, replace the problem board.
    4. If the cause could not be specified by the above steps, replace the parts in the following order.

    • Conveyance drive board
    • Printer control board
    • DC Power supply /1 (p/n A1RF M401 01)
    • Wiring (p/n A1RF N205 00)

    IMPORTANT: Please check the wiring harness(es) by unplugging all associated connectors, checking all wires to ground (for a short) and checking continuity of the wiring (for an open).
    Thanks Synthohol for your availability.
    I have already changed the cards
    • Conveyance drive board
    • Printer control board
    • DC Power supply /1 (p/n A1RF M401 01)

    and I have the same error code.
    but when I unplug the ADU conveyance motor M39, the error code C-5106 disappears. On the other hand when I run an impression, I have a jam just before the 2nd transfer and the code C-E006 appears. After restarting of machine, code C-5106 returned.
    NB: The ADU conveyance motor M39 engine was also changed

    Regards

  8. #8
    KONICA MINOLTA 50+ Posts Walterj's Avatar
    Join Date
    Jun 2017
    Location
    Lima
    Posts
    87
    Rep Power
    14

    Thumbs up Re: Error code C-5106 on Bizhub C8000

    Quote Originally Posted by jiceys View Post
    I have the error code C-5106 on C8000. The technical manual tell about "Main body: Fusing control circuit initial communication abnormality".
    I followed the instructions in the manual by changing the cards " • Conveyance drive board (CDB) • Printer control board (PRCB) • DC power supply /1 (DCPS/1)". But the error code is always present. Someone can help me please


    I hope this list of ICPs will serve you.


    Greetings.
    Attached Files Attached Files

  9. #9
    Senior Tech 100+ Posts
    Error code C-5106 on Bizhub C8000


    Join Date
    Sep 2017
    Location
    Chula Vista
    Posts
    100
    Rep Power
    15

    Re: Error code C-5106 on Bizhub C8000

    I have the same issue on a C-1100 . Any update on this problem? I have changed or tested just about everything listed here.

  10. #10
    Junior Member
    Join Date
    Jan 2020
    Location
    California
    Posts
    2
    Rep Power
    0

    Re: Error code C-5106 on Bizhub C8000

    I’m having same issue as OP on C8000. Machine immediately goes to 5106. What was your final solution?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here