Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: B554e J30-03

  1. #1
    Senior Tech 100+ Posts Brett GS's Avatar
    Join Date
    Jun 2013
    Location
    N/A
    Posts
    154
    Rep Power
    23

    B554e J30-03

    Hi all
    Got a B554e jamming (j30-03).
    Paper gets into the fuser and stops.
    So far replace fuser drive/exit clutch,reg unit,exit unit,duplex unit,fuser,complet pickup unit,fuser drive motor and 2nd transfer door,checked all the icp's on PCRB but still no luck.
    Machine is on 400k.
    Am i missing something

  2. #2
    Tecnico 250+ Posts acusso1234's Avatar
    Join Date
    Dec 2008
    Location
    Milano, Italia
    Posts
    250
    Rep Power
    34

    Re: B554e J30-03

    Quote Originally Posted by Brett GS View Post
    Hi all
    Got a B554e jamming (j30-03).
    Paper gets into the fuser and stops.
    So far replace fuser drive/exit clutch,reg unit,exit unit,duplex unit,fuser,complet pickup unit,fuser drive motor and 2nd transfer door,checked all the icp's on PCRB but still no luck.
    Machine is on 400k.
    Am i missing something
    Recently a Mono 754 had that exact jam code.
    The first third of the A4 60gms paper was hitting a toner build-up hidden into the duplex unit. Disassemble is a joke.
    Never heard back that particular customer.
    ... In the minute that you're thinking of giving up, think about why you lasted so long ...

  3. #3
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: B554e J30-03

    How is the image registration on the jammed prints?
    Bypass working?
    Whatever

  4. #4
    Service Manager 2,500+ Posts
    B554e J30-03


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,831
    Rep Power
    133

    Re: B554e J30-03

    Really strange it's still jamming with everything you replaced.

    Does it do it every time? Paper stop at same "exact place"? If "exact place" it has to be a sensor. If where paper stops varies then look at clutches, rollers, etc.

    Are there any sensors that were not replaced with everything you did replaced? That's all I can think of right now. Let you know if anything else comes to mind.

  5. #5
    Master Of The Obvious 10,000+ Posts
    B554e J30-03

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: B554e J30-03

    30-03 is usually the exit clutch CL8. I've done a lot of them. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: B554e J30-03

    If you print A4 in SEF and LEF. Does the the leading edge or the trailing edge stay in the same position?
    That is if the jam is in the same position every time.
    Changed any harnesses?
    Whatever

  7. #7
    Senior Tech 100+ Posts Brett GS's Avatar
    Join Date
    Jun 2013
    Location
    N/A
    Posts
    154
    Rep Power
    23

    Re: B554e J30-03

    Image is fine.
    Does the same on all trays including the bypass.
    No harness changed.
    Jams in the same spot ( constatinas in the fuser)

  8. #8
    Senior Member 100+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    109
    Rep Power
    16

    Re: B554e J30-03

    Change the fusing unit drive clutch as seen below.
    If it is the first time changing it out at least 2 hours aside.
    Attached Images Attached Images

  9. #9
    Senior Tech 100+ Posts Brett GS's Avatar
    Join Date
    Jun 2013
    Location
    N/A
    Posts
    154
    Rep Power
    23

    Re: B554e J30-03

    Quote Originally Posted by byronf View Post
    Change the fusing unit drive clutch as seen below.
    If it is the first time changing it out at least 2 hours aside.
    Done that already

  10. #10
    Master Of The Obvious 10,000+ Posts
    B554e J30-03

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: B554e J30-03

    There are two clutches in that drive pack CL6 and CL8. They're identical. Are you sure it was CL8? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here