Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: bizhub c754e

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2010
    Location
    JEDDAH
    Posts
    69
    Rep Power
    0

    Exclamation bizhub c754e

    hi dear i have problem for c754e jamming j30-03 as per manual i change PS38-PS39-PS40 but still same and i also change PRCB and PFTDB but can not solve problem
    if any one face this problem plz help me (copier still new only 5080 pages print).

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Oct 2014
    Location
    wareham.mass
    Posts
    343
    Rep Power
    23

    Re: bizhub c754e

    Check M2 registration motor in I/O mode...

    Sent from my SM-N950U using Tapatalk

  3. #3
    Master Of The Obvious 10,000+ Posts
    bizhub c754e

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: bizhub c754e

    Check that the timing belt hasn't walked off the side of the duplex motor at the top right of the door. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Service Manager 1,000+ Posts
    bizhub c754e


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: bizhub c754e

    Quote Originally Posted by blackcat4866 View Post
    Check that the timing belt hasn't walked off the side of the duplex motor at the top right of the door. =^..^=
    yeah I have had one like that at runup

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Oct 2014
    Location
    wareham.mass
    Posts
    343
    Rep Power
    23

    Re: bizhub c754e

    Black ya..that happened 2 me

    Sent from my SM-N950U using Tapatalk

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Dec 2015
    Location
    Pooler, GA
    Posts
    290
    Rep Power
    22

    Re: bizhub c754e

    Don't remember if it was this model or this code or not. There is a clutch that the service manual does not mention. It drives the roller after the fuser for the duplex/fuser exit. The wires were barely connected from the factory so it would work then quit, sometimes for several hundred copies.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here