Hi,
We have many Bizhub 308e-s the fuser went wrong at 100.000 copies instead of 600.000. It is very annoying with a new MFP.
Do you have a similar experience?
Gergő
Hi,
We have many Bizhub 308e-s the fuser went wrong at 100.000 copies instead of 600.000. It is very annoying with a new MFP.
Do you have a similar experience?
Gergő
We have had more squeaks than anything. But KonicaMinolta does warranty these. Get your authorized tech!
If the problem is noises, you can stop the polygon motor, fuser and fans from turning during standby, by enabling silent mode with dipswitches 37 and 38.
2.10.21 DipSW No.37, 38
Function
• Silent mode choice
Use
• It switches the drive for the polygon motor, fusing, and fan during standby.
Setting value
SW No.
37 38
OFF OFF Normal mode (Default)
ON OFF Silent mode Level 1 (Advance polygon rotation is not energized)
OFF ON Silent mode Level 2 (Advance polygon rotation is not energized. Fusing and fan don't rotate during
standby)
ON ON Normal mode
Last edited by BR549; 02-19-2019 at 01:56 AM.
Bookmarks