Does anyone have these or know if they are the same on other finishers?
A2YUPPT400 Stapler Movement Motor
A2YUPPW300 tray lift up motor
Does anyone have these or know if they are the same on other finishers?
A2YUPPT400 Stapler Movement Motor
A2YUPPW300 tray lift up motor
Hi, can I ask you why?
I had an alleged problem with those pieces. In fact, I later discovered that a photointerrupter sensor did not operate them.
Getting 1102 code. Stapler operates upon boot a couple of times then goes into code.
Ok, my mistake, however, I get stuck immediately at the first print.
Then I would exclude that sensor but I would take into account the finisher board.
After a cross reference search, They are unique to that finisher.
The error code is for tray up/down movement.
A2YUPPT400 Stapler Movement Motor - FS-533 and FS-538
A2YUPPW300 tray lift up motor - FS-533 and FS-538
Where located?
Why is the error code for a tray lift motor when the trade does not lift?
Bookmarks