Does it make a small movement or absolute zero?
Thanks: 0
Likes: 0
Dislikes: 0
Does it make a small movement or absolute zero?
None that I see. It’s the small internal finisher. The stapler tries its staple a few times , stops then pauses and error code.
today I had a code C-1106. I removed the side covers and I pushed the stapler at the bottom. Now the code does not seem to appear.
I advise you to do the same thing for the tray. If you can manually lower it completely, the problem could be solved without replacing anything.
Ok all, small internal finisher here, FS533. The exit tray is stationary and NOT a moving part that I can see so why the 1102 code?!?!? Not , 1106 or 1101 or any other code.
The exit tray is definitely a moving part. It raises and lowers. That's why the 1102 code. Look closer, maybe remove some covers.Originally Posted by mrfuser
Exactly, the tray is movable but when it hangs it is very rigid, especially when it is lifted.
As soon as you unlock it initially, then it goes down / rises without problems
Ok tray seems to move and now throws c-1109 code!?!?!!
looks like the staples are just getting stuck when it tries to load them and they pile up inside the stapler
Posting Permissions
Reply With Quote
Bookmarks