C554e Firmware Issues

[frizby66]

Apologies, have a second post with imaging issues but thought better to do this on another post (not to confuse issues). Have an issue with c554e going to sleep and refusing to wake without a power off/on. Have checked the power save settings, have switched off the weekly schedule but still no difference. Below is screen shot of settings. Have also included details of the current firmware, is this the most up to date? If not, any resource for getting the latest firmware?
Screen Shot 2019-03-01 at 08.09.09.jpgScreen Shot 2019-03-01 at 08.08.56.png

MFP Card Version	A5C10Y0-F000-GDF-M1(00)
MFP Controller BOOT Program	A5C10Y0-1E00-G00-04(00)
MFP Controller Linux Base	Linux-2.6.26.8-rt16
MFP Controller Kernel Program	A5C10Y0-1C00-GC1-76
MFP Controller SubSet	A5C10Y0-1F00-G00-M6(00)
MFP Controller	A5C10Y0-0100-GDF-M1(00)
Operation Panel Message Data	A5C10Y0-8100-GCE-M1
Fax Board Controller1	A22M0Y0-4000-G00-12(00)
Fax Board Controller2
Fax Board Controller3
Fax Board Controller4
Engine Parameter	A5AY0Y0-0054-G00-00
Engine BOOT	A5AY0Y0-0055-G00-00
Scanner	A5C10Y0-0023-G00-33
Printer	A5AY0Y0-0050-GC2-31
ADF	A3CE0Y0-0024-G00-16
Finisher	A3EP0Y0-0071-G10-03
RU
ZU
Panel CPU	A55V0Y0-8900-G60-00
DSC1
DSC2
Loadable Device Driver1
Loadable Device Driver2
SD	A3ER0Y0-0071-G00-08
Voice Data
Movie Data
Dictionary Data
OCR Library
Panel Sound Data	A5C10Y0-C200-G00-00
MFP Controller Thread Image Parameter	A5C10Y0-8B00-G00-01
MFP Controller PIC Image Parameter	A5C10Y0-8A00-GC0-06
MFP Controller System	A5C10Y0-1000-GDF-M1(00)
MFP Controller Print Controller	A5C10Y0-3000-GCY-44
MFP Controller Print Controller Font	A5C10Y0-3F00-GCD-40
MFP Controller Print Controller Demo Page	A5C10Y0-3E00-G00-81
MFP Controller MIO	A5C10Y0-5000-G10-W8(00)
MFP Controller PIC	A5C10Y0-8200-GD6-B2

[kingarthur]

when you say you've "checked the power save settings", have you set them to the following, "Enter power save mode" set as "NORMAL". "power consumption in sleep mode" set to "DISABLED", there was a bulletin about this a coupe of years ago .

[frizby66]

when you say you've "checked the power save settings", have you set them to the following, "Enter power save mode" set as "NORMAL". "power consumption in sleep mode" set to "DISABLED", there was a bulletin about this a coupe of years ago .

Hadn't seen any bulletin on this...have updated settings and will see how if that makes a difference :-)

Any idea on the firmware? Saw something about an issue with SSD firmware!

[kingarthur]

As far as I'm aware, SSD is updated now with the mass production FW, bulletin number TNGB1400318EN ,
this is the bulletin number TAGB1400537EN for the machine not waking up