Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 14
bizhub 600 toner tank gear problem
i have replaced 3 times the tone tank gear. the gears. the gears does not rotate smothly.what is the cause of it.
-
Re: bizhub 600 toner tank gear problem
Any lego or pixie turds in there?
Cause-> run down dev tank...
Developer pissing on the gears. The bushings wear out and dev gets thru.
Replace the dev unit every 1M prints.
Countermeasure is to change the front and rear bushings out after 500K then you can get more life out of it.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks