Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jun 2007
    Posts
    164
    Rep Power
    0

    Bizhub c364e can't run stabilizer

    Installed new oem K black drum unit and can not run stabilizer in gradation mode.
    Will not allow you to highlight and select paper size or copy or print modes after stabilizer is run first. Doesn't give any codes. Copies look good but can't run gradation mode to calibrate. Need suggestions.

  2. #2
    Aging Tech 10,000+ Posts
    Bizhub c364e can't run stabilizer

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,901
    Rep Power
    322

    Re: Bizhub c364e can't run stabilizer

    In this situation there are usually P codes present. Check for an oil can on the display.

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Dec 2009
    Posts
    678
    Rep Power
    60

    Re: Bizhub c364e can't run stabilizer

    Recently have same situation on C220.
    Go to service mode-Imaging Process Adjustment-stabilizer and try,not from gradation menu.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jun 2007
    Posts
    164
    Rep Power
    0

    Re: Bizhub c364e can't run stabilizer

    Quote Originally Posted by Toxic View Post
    Recently have same situation on C220.
    Go to service mode-Imaging Process Adjustment-stabilizer and try,not from gradation menu.
    Thanks but already tried that and still no response.

  5. #5
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,077
    Rep Power
    344

    Re: Bizhub c364e can't run stabilizer

    What about posting other consumables life?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  6. #6
    Service Manager 5,000+ Posts
    Bizhub c364e can't run stabilizer

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,502
    Rep Power
    182

    Re: Bizhub c364e can't run stabilizer

    Run the initialise + stabilise then try again.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  7. #7
    Junior Member
    Join Date
    Jan 2013
    Location
    Guymon, Ok
    Posts
    2
    Rep Power
    0

    Re: Bizhub c364e can't run stabilizer

    Make sure and have either letter or 11 x 17 in the top tray and set as normal paper. That should help you.

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43

    Re: Bizhub c364e can't run stabilizer

    It was on this series were we had to flash the firmware before it work. Showing no P-codes or anything.

  9. #9
    Senior Tech 250+ Posts
    Bizhub c364e can't run stabilizer

    wjurls's Avatar
    Join Date
    Feb 2017
    Location
    Riverside, CA
    Posts
    396
    Rep Power
    28

    Re: Bizhub c364e can't run stabilizer

    Are the default setting set to Black and White mode? If so, select full color on the control panel before entering service mode. Then gradation should be available.

  10. #10
    Master Of The Obvious 10,000+ Posts
    Bizhub c364e can't run stabilizer

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,434
    Rep Power
    462

    Re: Bizhub c364e can't run stabilizer

    Try running the attached document. Pay particular attention to the 11% full pages. I had a couple of machines that the magenta developer was dying. The 11% magenta was poorly developed at the rear.
    =^..^=
    Attached Files Attached Files
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here