Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Sc95-01    sc80-01  bizhub 1050   fixed

    pudgi300's Avatar
    Join Date
    Sep 2007
    Location
    ALBANY N Y
    Posts
    187
    Rep Power
    0

    Sc95-01 sc80-01 bizhub 1050 fixed

    Just a little tip if someone has a BIZHUB 1050 with SC95-01 and SC80-02 when going to service mode. Machine would go to Ready To Copy but fail with J17-02 then throw SC95-01. After replacing prcb,oacb,accb and both adu boards. Seemed to be a dead end. What fixed the machine was replacing the ADU Connecting wire Assmy that had broken wires. p/n 56ua90210. Hope this helps someone.

    SORRY SC80-01 should be SC80-02
    Attached Images Attached Images
    Last edited by pudgi300; 03-21-2019 at 03:39 PM.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Sc95-01    sc80-01  bizhub 1050   fixed

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Sc95-01 sc80-01 bizhub 1050 fixed

    Good catch! It take a lot of opening and closing of the drawer to wear through those wires. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here