This copier has 620K print.
This is the first time that I see this copier (so I have no idea what was done before).
Symptom: Tray 1,2,3 when printing - the image is too close to the front, (when copy the image is too close to the rear). Manual tray image is centered ok.
All paper trays guides are tight.
I adjust the margin with the service mode to the maximum -3mm, that move the image to the center but it is not enough, rear-front margins are not the same.
There are 2 attachment, one before the adjustment and one after, those are made with copy mode, in printing mode the margin will be reversed.
Any idea (beside initialize the copier)?
Thanks
Bookmarks