I just looked down the list and found an ISO paper size just a little bigger than US Folio. And yes I thought too that at ~13" or 14" it could not possibly pass LEF through a C284e. =^..^=
I just looked down the list and found an ISO paper size just a little bigger than US Folio. And yes I thought too that at ~13" or 14" it could not possibly pass LEF through a C284e. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
May have to correct myself again.
Attachment 42270
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
And the OP is MIA.
Whatever
hello I have the same problem on a c554e how did you solve?
Hi, it would be appropriate to create a new thread with the characteristics of your problem.
There is a known issue with this series machine, with the duplex switchback gate solenoid. The cure (which I have not done in a couple of years), is to add a spacer (I've used the corner of an old credit card) and put it in between the solenoid plunger arm and the frame. Gives the solenoid less ability to open (which I assume has something to do with timing?) and keeps the gate open longer. I can't put my hands on the bulletin/info at the moment, but a buddy of mine originally found the problem and reported it to KM.
Hope this helps.
OC
Bookmarks