Konica minolta Bizhub C 252

Nazakat · 10-07-2008

Hi to all

Can anybody tell me how to reset transfer unit in Konica Minolta C 252?

Thanks in Advance

dogsbody · 10-07-2008

replace the fuse. it is a 80mA glass fuse but i have used 50, 80 and 100mA.

Nazakat · 10-09-2008

Dear Friend,

I have worked alot on toshiba but on Bizhub i am new.Please guide me where can i find the Fuse? i took out the transfer unit but couldent find the fuse.

dogsbody · 10-10-2008

imagine the transfer belt in the machine, it should be on the right at the front. there is a small cover that comes off and it is under there.

ni311 · 10-10-2008

BizHub C 250 - Transfer Unit

Nazakat · 10-22-2008

Dear Friend,

I have replaced the fuse of Transfer belt but after that it start giving Code C-2451 and stuck.I tried to place fuse 50ma,80ma and 100ma but to no avail.What else i can do to reset it.

ni311 · 10-22-2008

Did you try to reset the code?
Start from main power with the utility button holded down until trouble reset pops up on the display, touch the button, turn it off and then on.

Nazakat · 10-23-2008

Friend,

I did that but when copier reaches to Stablizing Images it gives that Code Again.

DadO · 10-23-2008

Recheck the ITB. Check the how ITB lays on its position. This works 100% so it looks like u didnt place fuse correctly and check metal connector of ITB and the machine

sta · 10-30-2008

	Quote:			Originally Posted by dogsbody
	replace the fuse. it is a 80mA glass fuse but i have used 50, 80 and 100mA.

please talk to me what replace fuse.