Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Technician
    Join Date
    Nov 2015
    Location
    Glasgow
    Posts
    21
    Rep Power
    8

    KM458 and 558 running Papercut C9401 and FA14

    Hi all

    We currently have multiple new MFD's on various sites running Papercut displaying C9401 and FA14 errors. All machines running on W5 firmware. We have also rolled devices back to R9 to see if this would improve reliability but no such luck so all back running W5.

    Any KM techs/specialists dealt with this issue and what settings were implemented to resolve?

    Thanks in advance

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,026
    Rep Power
    32

    Re: KM458 and 558 running Papercut C9401 and FA14

    There is a special firmware dealing with "Papercut" issues.

  3. #3
    Technician
    Join Date
    Nov 2015
    Location
    Glasgow
    Posts
    21
    Rep Power
    8

    Re: KM458 and 558 running Papercut C9401 and FA14

    What firmware level is it?

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Mar 2017
    Posts
    279
    Rep Power
    12

    Re: KM458 and 558 running Papercut C9401 and FA14

    I just installed 90 8 series on papercut ver 18.2. All using I-Option. and all devices at W5. I have not seen any of these issues and they work this system like a dog. What version are you using?

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,026
    Rep Power
    32

    Re: KM458 and 558 running Papercut C9401 and FA14

    GC2-V1

  6. #6
    Technician
    Join Date
    Nov 2015
    Location
    Glasgow
    Posts
    21
    Rep Power
    8

    Re: KM458 and 558 running Papercut C9401 and FA14

    Quote Originally Posted by emujo2 View Post
    I just installed 90 8 series on papercut ver 18.2. All using I-Option. and all devices at W5. I have not seen any of these issues and they work this system like a dog. What version are you using?
    Hi emujo2,

    The site is running Papercut Ver: 18.3.6 with W5 firmware.

    On another site we have version 18.2.2 running on W5 and we had to roll W5 back to R9 due to issues and moving forward on the site with 18.2.2 we are looking at rolling back Papercut to Ver 18.1.4.

    Regards

  7. #7
    Technician
    Join Date
    Nov 2015
    Location
    Glasgow
    Posts
    21
    Rep Power
    8

    Re: KM458 and 558 running Papercut C9401 and FA14

    Quote Originally Posted by mo0651 View Post
    GC2-V1
    Thanks mo0651 I'll look into the firmware release notes and see if this is applicable for rolling out for issue.

    Regards

  8. #8
    Technician
    Join Date
    Nov 2015
    Location
    Glasgow
    Posts
    21
    Rep Power
    8

    Re: KM458 and 558 running Papercut C9401 and FA14

    Quote Originally Posted by El Papa View Post
    Thanks mo0651 I'll look into the firmware release notes and see if this is applicable for rolling out for issue.

    Regards
    Papercut issue V1 resolves from looking at release notes is C-E301 and the FA14 error. No mention of the 9401 error :-(

  9. #9
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,026
    Rep Power
    32

    Re: KM458 and 558 running Papercut C9401 and FA14

    C94-01 CODES are covered in the TROUBLE SHOOTING GUIDE FOR 8 Series. It did say c94-01 after firmware updates.

  10. #10
    Technician
    Join Date
    Nov 2015
    Location
    Glasgow
    Posts
    21
    Rep Power
    8

    Re: KM458 and 558 running Papercut C9401 and FA14

    Quote Originally Posted by mo0651 View Post
    C94-01 CODES are covered in the TROUBLE SHOOTING GUIDE FOR 8 Series. It did say c94-01 after firmware updates.
    Can you mail me the trouble shooting guide?

    Regards

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •