Usually only work on the bigger machines but have a few customers asking for smaller color machine. I see a lot of C3350's at the off lease warehouse where I buy my machines. It seems a lot like the C35 which was crap!
Is the Biz C3350 suppose to have a demo page where the config, & font lists usually are? Every K/M I've worked on the last several years have that demo page with the bird on it.
No big deal but it's nice to have have that page to check quality when servicing, etc.
Thanks
- Press the Utility/Counter button
- Select User Settings
- Select Printer Settings
- Select Print Reports
- Select Configuration Page
Poster wants to print the DEMO page.Originally Posted by guitar9199
The C3350 doesn't have this option, possibly because its not actually made by Konica Minolta just "rebadged"
You can still do your gradation & test prints in CE mode.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
No bird on this one.
But its a hell of a lot better than a c35 so don't hate on it yet.
Full dual tandem engine on a small machine!
Whatever
Yes better than the C35 however still has its issues!
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Agreed..
Seem to be lucky with them. Its an acceptable machine as to where the C35 is a disgrace of a thing.
That and its relative the B36/42.
We should start known issue threads on the machine.
What KM machine do you think will have the longest one?
Whatever
My bad.... I thought all "Monicas" had the same test pages built in.
Will try and remember for the next one.... Thanks.
Thanks everyone. Didn't realize it was rebadged. I know the small B&W 25e is a Muratec which the few I sold seem to be working decent. Is the C3350 also a Muratec? The control panel looks like a mini 4 series plus you enter service mode the same so figured it was K/M design. Never know know a days.
put a few hi res pdfs on a flash drive and print from the units USB port.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Often it's hard to identify the KM re-bdges. KM usually writes their own firmware, so the KM experience is pretty uniform even on the Lexmark rebadges. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks