Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    SanDiegoCopierRepair.com 1,000+ Posts
    BH C654 FS-534 finsher skew

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    BH C654 FS-534 finsher skew

    Skewed paper output when the eject unit fingers are misaligned, normally can be fixed by moving them back into aligned position and does not frequently reoccur.
    Have one unit that goes out of alignment more often. Question:

    What causes the fingers to go out of alignment? Both are driven by the same motor/shaft. The belts slipping could do this I guess but they seem fine. C654e fs534 eject unit.JPG
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  2. #2
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,102
    Rep Power
    346

    Re: BH C654 FS-534 finsher skew

    Do search here for: FS-534 alignment plate wearing
    You will find some interesting posts.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  3. #3
    SanDiegoCopierRepair.com 1,000+ Posts
    BH C654 FS-534 finsher skew

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    Re: BH C654 FS-534 finsher skew

    Quote Originally Posted by tsbservice View Post
    Do search here for: FS-534 alignment plate wearing
    You will find some interesting posts.
    Thanks for replying. I am aware of the alignment plate wearing issue........ this issue is for the eject unit pulleys/fingers misalignment and ideas as to what causes it. Completely unrelated to those worn alignment plate issues.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: BH C654 FS-534 finsher skew

    Like you said they are driven together. Have you removed the belt to check the inside on them and the pulleys? Looks ok?
    Even if bushings wear the belt tension can drop.
    Whatever

  5. #5
    SanDiegoCopierRepair.com 1,000+ Posts
    BH C654 FS-534 finsher skew

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    Re: BH C654 FS-534 finsher skew

    Quote Originally Posted by allan View Post
    Like you said they are driven together. Have you removed the belt to check the inside on them and the pulleys? Looks ok?
    Even if bushings wear the belt tension can drop.
    Something certainly seems to be slipping......if clean/lube doesn't resolve it, guess I'll replace the individual parts....looking at my parts catalog , don't think Konica sells the entire eject unit.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    826
    Rep Power
    50

    Re: BH C654 FS-534 finsher skew

    Quote Originally Posted by blazebusiness View Post
    Something certainly seems to be slipping......if clean/lube doesn't resolve it, guess I'll replace the individual parts....looking at my parts catalog , don't think Konica sells the entire eject unit.
    The eject unit comes as an assembly complete with motors etc.
    Incidentally the one in the picture looks quite worn. We also have had cracks appearing in them which causes all sorts of issues.
    Last edited by tech51; 05-07-2019 at 06:45 PM. Reason: More info.

  7. #7
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,102
    Rep Power
    346

    Re: BH C654 FS-534 finsher skew

    Quote Originally Posted by blazebusiness View Post
    Thanks for replying. I am aware of the alignment plate wearing issue........ this issue is for the eject unit pulleys/fingers misalignment and ideas as to what causes it. Completely unrelated to those worn alignment plate issues.
    Sorry for that, my bad.

    Quote Originally Posted by blazebusiness View Post
    Something certainly seems to be slipping......if clean/lube doesn't resolve it, guess I'll replace the individual parts....looking at my parts catalog , don't think Konica sells the entire eject unit.
    Looking in FS534 manual shows this as whole unit: A3EPPPDE03 Ejector Unit
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  8. #8
    Master Of The Obvious 10,000+ Posts
    BH C654 FS-534 finsher skew

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: BH C654 FS-534 finsher skew


    There are no less than (6) bulletins changing that eject assy. Order the assy and be done with it. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    SanDiegoCopierRepair.com 1,000+ Posts
    BH C654 FS-534 finsher skew

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    Re: BH C654 FS-534 finsher skew

    Quote Originally Posted by blackcat4866 View Post

    There are no less than (6) bulletins changing that eject assy. Order the assy and be done with it. =^..^=
    Sounds like good advice-----thanks to all for the replies.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  10. #10
    Service Manager 1,000+ Posts
    BH C654 FS-534 finsher skew


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: BH C654 FS-534 finsher skew

    my theory is users are putting hand in to grab paper instead of waiting for it to eject and one finger smacks into their hand and put its timing off compared to the other one.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here