A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Heck, I've forgotten patterns. Indeed they could tighten for the solution of the problem.
I will try with the replacement of the K drum. I have many series 8 and the drum has always almost respected his life. This could be one of the first cases. In any case, the printer at 2 years then the drum could be aged (?) I keep you updated
Switch from thin to thick and vice versa between 5-10 pages
Mag roller on mine was great.
At first I checked the fuser. All good there.
Then I checked the drum. Looks good.
Finally pulled the dev unit. Perfect.
Since it looked like a drum issue I just replaced the drum and went back to great copies.
Bix may have a different issue. I'm simply saying that a drum or charge roller may look great but still be bad.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hi, here's an update.
Today I replaced it with a black drum.
Unfortunately it didn't solve the problem. I did the patterns printing and the line appears in all colors.
I pulled the strap out, it looks good but manually turning I noticed that it leaves a slight strip. In fact, after making it turn manually, I made 5-10 prints and the line did not appear, only to appear again.
Maybe there's something inside the belt cleaning blade. I will try to replace it. What do you think?as1.jpgas2.jpg
Solved
Cleaning blade did not clean at one point. There was a small groove in the transfer belt. replaced
Bookmarks