Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Technician
    Join Date
    Jul 2017
    Location
    SYDNEY
    Posts
    22
    Rep Power
    5

    Konica c364e Scan to SMB not on copier display

    I have set up scan to file SMB via the web browser. Everything is correct and the you can clearly see it is set up in the web browser .
    There is nothing on the display . in direct imput for scan to file (SMB) or the address i set up scan to email address are set up and showing up.

    HDD installed
    and installed firmware twice just incase it is corrupt.

    Im now at as far as i can go with it any help would be grateful

    Thank

  2. #2
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    556
    Rep Power
    32

    Re: Konica c364e Scan to SMB not on copier display

    Can you set up an scan to SMB entry in the address book from the operation panel?

  3. #3
    Senior Tech 250+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    393
    Rep Power
    7

    Re: Konica c364e Scan to SMB not on copier display

    Hi, my question may be silly.


    Did you check the letter filters? If you do not set "Favorites" they will not appear. You must select the "ABC", "DEF", etc. flags


    To be sure, press "All" on the Scan display .

  4. #4
    Technician
    Join Date
    Jul 2017
    Location
    SYDNEY
    Posts
    22
    Rep Power
    5

    Re: Konica c364e Scan to SMB not on copier display

    You can't see scan to file on the direct entry of the scan section . So you can't as far as can see set up scan to file at the machine.

    Yeah the set up address is set as favourite but if you click on the letter it does show the address there .

  5. #5
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    556
    Rep Power
    32

    Re: Konica c364e Scan to SMB not on copier display

    Make sure that the SMB client is set to on in the network settings.

  6. #6
    Technician
    Join Date
    Jul 2017
    Location
    SYDNEY
    Posts
    22
    Rep Power
    5

    Re: Konica c364e Scan to SMB not on copier display

    ďAll SMB protocol is already ON, such as client setting, smb server settings.

    Then, restarted machines few times after turn off and turn on these protocols.

    Also, performed firmware twice, disconnected and connected all cables from all boards in the back the machine this didn't resolve the problem.

    It seem something has been switched off . I'm guessing a softswitch . As I can't find anything on the machine or web browser

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Mar 2017
    Posts
    324
    Rep Power
    13

    Re: Konica c364e Scan to SMB not on copier display

    If you can see the one touch buttons in the PSWC address book, then you have either adminstrativly disabled smb scanning, or possibly corrupt HDD (this was a common issue on the C3350s). There are restrictions that can be placed though admin settings/restric user access, and under security settings that block direct input of some items. User authentication can also be used to block address book buttons. Any chance that you have this turned on with public user enabled without login? Another thing that is less likely is you enabled then disabled a Vendor mode. There are various settings that do not get automatically reset when this is done. A complete factory reset could bring things back to normal..Is this a recently purchased machine (used)?

  8. #8
    Technician techie0419's Avatar
    Join Date
    Apr 2017
    Posts
    24
    Rep Power
    5

    Re: Konica c364e Scan to SMB not on copier display

    I seem to recall there's a way to decide which buttons appear on the display, and which don't. There's one machine I have that the address book itself doesn't show up, even though we can add frequently used addresses through PSWC for when they fax or email (yes, they use fax).

    I'll have to see if I can remember where to go in order to select which buttons appear on the display...

  9. #9
    Technician
    Join Date
    Jul 2017
    Location
    SYDNEY
    Posts
    22
    Rep Power
    5

    Re: Konica c364e Scan to SMB not on copier display

    Quote Originally Posted by emujo2 View Post
    If you can see the one touch buttons in the PSWC address book, then you have either adminstrativly disabled smb scanning, or possibly corrupt HDD (this was a common issue on the C3350s). There are restrictions that can be placed though admin settings/restric user access, and under security settings that block direct input of some items. User authentication can also be used to block address book buttons. Any chance that you have this turned on with public user enabled without login? Another thing that is less likely is you enabled then disabled a Vendor mode. There are various settings that do not get automatically reset when this is done. A complete factory reset could bring things back to normal..Is this a recently purchased machine (used)?

    Yes it is I was informed the refurb team had factory rest the machine but . i can always give it a go

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •