C244 reset tool not working

[darkocg88]

So basically, can't enter the service menu, default password not working, dealership claims they haven't changed it.

Next step was reset tool. Machine isn't reacting to inserted drive into maintenance hub.

Any other ways to hard reset it or is my reset tool faulty? Or is there possibly other default pw for 244 other than 9272 x4

Thanks in advance

Sent from my Moto E (4) Plus using Tapatalk

[Reed]

You can try 12345678 or once in the service mode press " Stop, 0, Clear" This will take you into another service mode from there look for "CE Authentication" There are two choices that have CE in front of them. One allows you to change it and the other to turn it off. You can turn it off so that no password is required. There are two choices that have CE in front of them. One allows you to change it and the other to turn it off. I always turn it off

[darkocg88]

You can try 12345678 or once in the service mode press " Stop, 0, Clear" This will take you into another service mode from there look for "CE Authentication" There are two choices that have CE in front of them. One allows you to change it and the other to turn it off. You can turn it off so that no password is required. There are two choices that have CE in front of them. One allows you to change it and the other to turn it off. I always turn it off

Can't enter service mode at all

Sent from my Moto E (4) Plus using Tapatalk

[Reed]

I'm confused I thought you got to the service screen where it is asking for a P/w?

[darkocg88]

I'm confused I thought you got to the service screen where it is asking for a P/w?

Yeah that's the point where I'm stuck. So what do you mean, I enter that command on counter keyboard?

Sent from my Moto E (4) Plus using Tapatalk

[Reed]

yes before pressing any more keys do not try to enter a p/w .. Press "stop, 0 , Clear

[marvin_PL]

Take off rear left cover,then check if cable of sensor usb service port USB is connected

[rrrohan]

yeah just escalate the problem to dealer support. provide them with the token key it generates then they will provide you with a password reset key.

[copyman]

Did you try 12345678 or 1234567812345678. Or try 9272 one or 2 times.

I change all my passwords to 12345678, same as the admin.

Most of the time I turn off CE password.

[arahael]

in some older ver firmware there was bug. open/close front door then menu key xD