Dislikes: 0
Ok, it's latest base FW, I will go with latest special version, just in case.Originally Posted by Bix
One thing that bothers me is that in your service shop machine worked well, it may be perchance that problems arised at customer's site...but double check network settings and setup.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Hi, it worked well before delivery by the customer.
Actually now also in my office it gives problems. I ordered a new motherboard.
Hi, bad news: changed HDD, SSD and today the motherboard. Unfortunately none of it worked. The display sometimes freezes and shortly afterwards FA14 always comes out
Have you tried running the machine with the HDD uninstalled and unplugged?
Was the HDD you installed new?
Hi, now I have replaced the monitor from another machine and it seems to work. However, the problem does not occur in the other machine.
However now I have a new problem. With the new SSD and MFPB, the CE Password and Admin password do not work.
Regarding CE Password. Generate request code and send it to KM, they should verify it and give you another to put into the machine, from there you can change Admin pass.
Regarding panel assembly. Change A5C1N15601 Interface Cable.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Thank you! However, a short while ago the other machine also crashed the display so I think it's defective.
Now I will try to put back the old motherboard and SSD. I'll keep you up-to-date
Hopefully you didn't replace the SSD and the MFPB at the same time.
No, I didn't. But since the monitor did not work, in the FW installation it started automatically with a wrong Machine Type. Perhaps that caused problems.
However now I put the old MFPB and the old SSD and it all works again.
In summary: the problem was the panel. By replacing the entire screen the problem is solved.
Having the same issue with Km 458 and 308 all in the same location. Have tried everything with no success.
Did changing the ops panel finally cure the problem?
Thanks: 
Likes: 
Reply With Quote
Bookmarks