Page 2 of 9 FirstFirst 123456789 LastLast
Results 11 to 20 of 86

Thread: C360i

  1. #11
    Field Supervisor 500+ Posts
    C360i


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    896
    Rep Power
    28

    Re: C360i

    beleive it or not i really like the new Web interface. much less pages that need to reload everytime you want it to save a change

  2. #12
    Field Supervisor 500+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    555
    Rep Power
    11

    Re: C360i

    Have they changed the web interface too?


    I haven't seen this yet. What did they remove?

  3. #13
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    1,095
    Rep Power
    54

    Re: C360i

    Some web trainings on new models are available.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  4. #14
    Junior Member
    Join Date
    Oct 2013
    Posts
    7
    Rep Power
    0

    Re: C360i

    Quote Originally Posted by rrrohan View Post
    having trouble with boot screen

    it appears in top left corner of screen but has grey band on bottom and RHS where the start/stop/reset 'button' will be once it boots up.
    cant tell if this is a issue or intended.

    im tempted to just not install our bootscreen as most of the time it boots up and oly displays it for a few seconds to the point most customers wouldnt even notice it flash up then away

    is boot screen converter version 3.1.1.0 the latest?
    The boot screen image resolution has changed to 1024x600. We had the same problem using our old bin file on these machines. Had to make the image larger.

  5. #15
    Trusted Tech 50+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    59
    Rep Power
    4

    Re: C360i

    Quote Originally Posted by rrrohan View Post
    We ended up locking it back to the traditional menu again.

    the little light in the output tray is nice touch.

    i also like that removing back cover is only 3 screws.

    and no more Dual Scan Board to install or upgraded memory.

    still not a fan of the fax kit, the usb cable isnt so bad but that other connector is messy looking. i normally dont attach this the way manual suggests i just connect it directly to the MFP that way its hidden behind covers.

    Finally how to set the classic interface as default?

  6. #16
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    637
    Rep Power
    30

    Re: C360i

    Please read the manual with regard to the power supply on this model. Important safety issue to keep in mind as a tech....

  7. #17
    Field Supervisor 500+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    555
    Rep Power
    11

    Re: C360i

    Quote Originally Posted by tech51 View Post
    Please read the manual with regard to the power supply on this model. Important safety issue to keep in mind as a tech....
    What has changed?

  8. #18
    KonicaMinolta Senior Tech 250+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    267
    Rep Power
    26

    Re: C360i

    Well, that didn't take long. Already a service bulletin about the toner bottles not being detected properly and an FOC spacer kit to fix the issue if needed depending on the serial number.

    Model Cut-In Number
    C360i AA2J011000793
    C300I AA2K011000842
    C250I AA2M011000691
    Last edited by srvctec; 06-15-2019 at 03:23 AM.
    Started in the copier service business in the fall of 1988 and have worked at the same company since then, now the senior tech, since 2000.

  9. #19
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    637
    Rep Power
    30

    Re: C360i

    Quote Originally Posted by Bix View Post
    What has changed?
    You donít have a manual then?

    There has also been a bulletin on it.

    I canít say anymore for professional reasons but please get a manual and check it out.

  10. #20
    Field Supervisor 500+ Posts
    C360i


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    896
    Rep Power
    28

    Re: C360i

    Quote Originally Posted by srvctec View Post
    Well, that didn't take long. Already a service bulletin about the toner bottles not being detected properly and an FOC spacer kit to fix the issue if needed depending on the serial number.

    Model Cut-In Number
    C360i AA2J011000793
    C300I AA2K011000842
    C250I AA2M011000691
    Least the effected machines have the parts included and bulletin printed and included in box

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here