Results 1 to 8 of 8
  1. #1
    Service Manager 1,000+ Posts
    C364 ghosting, no gradation adj


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,683
    Rep Power
    54

    C364 ghosting, no gradation adj

    Slight ghosting on image when I arrived. Prints were fine after cleaning ID sensors, print heads, etc. But when I went to do gradation adj it wouldn't allow, print button would not turn blue. No oil can warnings. Tried all different size paper, drawers, etc. Only time I've seen this is when there was "P" code.

    Readings normal in state confirmation, etc

    All drums & dev units are only halfway or newer.

    Customer called back a few days later and it doing the ghosting again.

    Any ideas appreciated.

    Thanks in advance

  2. #2
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    3,427
    Rep Power
    68

    Re: C364 ghosting, no gradation adj

    If one of the color toners is finished it would also not do go to ready.
    Whatever

  3. #3
    Field Supervisor 500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    632
    Rep Power
    38

    Re: C364 ghosting, no gradation adj

    Did you try it from Administrator mode or only in Service mode?
    Also I remember there is a thread here about this problem with a couple of good advices, just search it.
    Find it:
    Bizhub c364e can't run stabilizer
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    707
    Rep Power
    29

    Re: C364 ghosting, no gradation adj

    is 2nd transfer set to users choice ?

  5. #5
    Aging Tech 1,000+ Posts
    C364 ghosting, no gradation adj

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Desboro
    Posts
    2,073
    Rep Power
    50

    Re: C364 ghosting, no gradation adj

    Check "Grad/Dev AC Bias V Selection" in service mode under Image Process Adjustment. Make sure it is set to off

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    707
    Rep Power
    29

    Re: C364 ghosting, no gradation adj

      is 2nd transfer set to users choice ?

  7. #7
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    3,427
    Rep Power
    68

    Re: C364 ghosting, no gradation adj

    Quote Originally Posted by copier addict View Post
    Check "Grad/Dev AC Bias V Selection" in service mode under Image Process Adjustment. Make sure it is set to off
    Also thought that but you can't even access gradation. The option is missing if V selection is on.
    Whatever

  8. #8
    Service Manager 1,000+ Posts
    C364 ghosting, no gradation adj


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,683
    Rep Power
    54

    Re: C364 ghosting, no gradation adj

    Thanks for the ideas so far. Going back on Tuesday after holiday. Called customer and he said it is working fine today, he ran a few prayer card jobs and they look great.

    This machine does have a Fiery on it but the test pages I used were the demo page with bird and internal test pages, half tones, etc. So that takes the Fiery out of the mix? I'm sure you have all seen where the space between the color blocks on demo page have color in the white space. Like the color registration is off.

    Looked around on the Kon/Min SSD knowledge base and didn't see much except one bulletin showing "blurry" pages and not able to run Grad adj, very similar to what I have. Going to try what's suggested. It claimed a new laser PH solved their issue. The PH is worse case scenario. Hope it's not that.

    Customer also mentioned today it has been weird lately coming out of sleep mode, not sure what he meant by that and if related. I find that strange because I turn sleep off on all my "4" series machines. There are known issues with sleep mode going back to "3" series so in the habit of being one of first things I do with off lease machines.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •