olivetti d-color MF304 copies with cyan or magenta vertical lines

[GIUBOSS]

hi to all , (should be a bizhub c308 ) and the problem only comes in color copy. I think it's a problem with the scanner section I installed the machine today , new , with original toner. executed stabilization and gradation of colors etc. Any ideas before calling for warranty? I add one photo, regards

[darry1322]

Lines of shame. Run the machine setup from the beginning and they will go away.

[Phil B.]

hi to all , (should be a bizhub c308 ) and the problem only comes in color copy. I think it's a problem with the scanner section I installed the machine today , new , with original toner. executed stabilization and gradation of colors etc. Any ideas before calling for warranty? I add one photo, regards

you didn't follow all the steps in the setup procedure...

start over....
complete every step -successfully- before moving on....
DO NOT SKIP ANY STEP IN THE PROCESS.

I made the same fubar on my first setup!

[GIUBOSS]

I have probably skipped some steps. I would like to refresh my memory if someone could help me, thanks

[Synthohol]

here ya go.

[arahael]

in service mode press STOP>3

[GIUBOSS]

Ok.Thanks. But the client called me yesterday for the installation but he didn't know that today another installation technician would come. I did a useless job 🤦*♂️

[darry1322]

Ok.Thanks. But the client called me yesterday for the installation but he didn't know that today another installation technician would come. I did a useless job 🤦*♂️

It happens. That's why we tease other techs with the "Lines of shame" joke. I've been doing this for almost 30 years and every time I set one up I make that first color copy while holding my breath.

You learned something new. We've all been there. Next time you see this you'll know exactly what's up.

[GIUBOSS]

well i started at age 19 with the dc mita and other brands, i'll never stop learning.