I have a problem with my konica minolta c258 showing misfeed detected. Remove paper as indicated by circle code 14. Have cheack every were I can find any paper in side machine please help me out
Sent from my SM-N950U using Tapatalk
I have a problem with my konica minolta c258 showing misfeed detected. Remove paper as indicated by circle code 14. Have cheack every were I can find any paper in side machine please help me out
Sent from my SM-N950U using Tapatalk
Try to open and close every door.
What is the actual jam code?xx-xx?
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
14
Sent from my SM-N950U using Tapatalk
I mean code 14
Sent from my SM-N950U using Tapatalk
Try looking in the duplex section..If you truly do not see any paper here, then you may have a torn piece of paper blocking an actuator, or a non working sensor. There are 2 sections of the side door, one hides the turnover (duplex) area.
This forum isn't designed to help an end user dig into a MFP to find broken sensors. If you do not see a piece of paper in this section and you are still showing a jam 14 then call a tech.
Then you must be the least trained tech I've ever heard of..This isn't even a trouble code..It's a jam code meant to direct the operator where to look for a jam. If you, as a tech, cannot determine if it's a torn piece of paper, a bad sensor, or paper still remaining in the paper path then you probably should be taking phone calls and sending tickets out to trained techs..
Bookmarks