not in book any ideas
not in book any ideas
There is now a part # for the "4" series SSD "9960P00H02D14P". This is probably not the same SSD but there should be a part # for the C308 SSD
I guess Kon/Min had to start selling as a part with many SSD's going bad.
There is a bulletin about changing the MFP & SSD pwb's. Using the reset firmware, etc.
The 8 series uses a totally different platform. No SSD like previous models.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
the process is the same, you are correct.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
You already had a thread going but decided to start another? No need to do that. That just adds clutter to the forum.
Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.
Its not listed because the part needs to be requested with a reason why its being replaced.
Manual states "contact KM tech support if the board needs to be replaced".
So why do you need to replace it?
Did you put it in another machine?
Whatever
Bookmarks