Hi there, can someone help me with a driver so that my TWN4 USB card reader can work on my Bizhub 363?
Thank you
Hi there, can someone help me with a driver so that my TWN4 USB card reader can work on my Bizhub 363?
Thank you
Downloads
They would be the ones to ask because that's not the type or brand konica officially supports.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Thanks but I already contacted them and said that I should contact KM to get the driver.
Since I am not a KM technician they will not give me the driver...
Konica publishes drivers for specific ones they support.
Which one is closest to yours?
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
I don't think KM is using this types of card readers, I know they are used with PaperCut, Equitrac or other management softwares and work on KM machines if they have the right driver.
i dont want to see you brick the machine from the wrong stuff.
just an FYI...
footnote 8...
Card Readers AU-201H HID Proximity Card Authentication Unit HID Proximity Card Authentication Unit 7640005064 AU-202H HID iClass Card Authentication Unit iClass Card Authentication Unit 76400083948
8 bizhub 652/552/C652DS/C652/C552DS/C552/C452 and bizhub 423/363: AU-202H, Indala Card Reader, Mifare Card Reader requires WT-506 Working Table; bizhub 283/223: AU-202H, Indala Card Reader, Mifare Card Reader requires HD-516 Hard Disk Drive and WT-506 Working Table; bizhub C360/C280/C220: Requires WT-506 Working Table. If WT-507 Working Table (Side Panel Kit) is installed, it can be used to mount the AU-202H. bizhub C754e/C654e/C754/C654/C554e/C554/C454e/C454/C364e/C364/C284e/C284/C224e/C224 and 754/654: AU-202H requires WT-506 Working Table or MK-735 Mount Kit to install internally, C3100P: Requires HD-P06 Hard Disk Drive.
i can give you the 201H driver but i only share files with contributors. not to be a d%#k, its just id like to see this forum become self supporting without the silly ads.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
In order for a card reader to work on a KM device, you have to install a driver (LDD) that tells the device how to use the card reader. The 363 has support for the AU-201H (HID Prox) , AU-204H (mag stripe), and the RF Ideas AK0 (MiFare) reader. Nothing else will work unless you know how to build driver files..E
Maybe you are right but I talked to Elatec and PaperCut and they both said that KM has the drivers for this device and I should contact them.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
I have seen a list of loadable drivers from KM Europe. There are Elatec drivers available for newer models but Bizhub 363 isn't listed.
Bookmarks