Hi. I have a Konica Minolta Bizhub C280 that needs to get into a basement space. Unfortunately the door jam to the basement is about 1 inch shy of getting the machine through. Does anyone have experience with moving a Bizhub in pieces? I am not an "official" tech so this would be new to me. Any help and support is greatly appreciated. Scott
You may be able to reduce the width by a single 1" by removing external covers. If that doesn't work the door frame will have to be removed (I know ... easier said than done). The metal copier frame is going to be the minimum width that you can get. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Remove the screen or else the entire side door. Like BC said its a solid metal frame.
Whatever
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks