Minolta Di1610 series.

[Hansoon]

I have to fill in some demand for lowest segment copiers and can get a bunch Off-Lease Di-1610(f)'s very cheap. Since most of the low segment Minolta's such as the Di-151 are crap with a big "C", I'd like to know if this is the same for the Di-1610.

Is the optional Scanunit SU-6 for the Di-1610f visible from the outside? Or in other words, can I see directly which machines are equipped with it?

Hans

[DadO]

1610 is almost identical 162 and 163. But can say i got 2 whit over 100k and 150k and definitely no problems whit them except standard pm(drum,dv,drum cleaner) while 162 and 163 did fall under 100k.
That wasn't been any big problem.It was like cof33 or cof32 error where u have to do f8 again and few other small problem.

U cant get bad with any of those machine ! almoust perfect! thumb up KonicaMinolta!

Everything is in side. U can see fax ports if it have fax.Su is on NIC card inside

[alexxcopier]

	Quote:			Originally Posted by DadO
	1610 is almost identical 162 and 163.

You are wrong this most likely to pagepro1380/90

	Quote:			Originally Posted by DadO
	U cant get bad with any of those machine ! almoust perfect! thumb up KonicaMinolta!

It's Ok for me i have a couple of them and they are around 50-60k and 3-4 years

[minimerlin]

I think you are not talking about the Di1610! It is a horrible little box, lots of problems with paper take up clutch. I would not recomend this box!

[Jan Sommer]

Well it's much better than the Di151 (this was the paper take up clutch mess)

But it also has some well known issues:

- mode keys are flmipsy and breaks pretty often
- paper tray pick up roller tends to become slippery in short cycles - cleaning does solve the problem
- customer can not reset the drum life counter
- toner cartridge genunie recognition uses flimpsy contacts so sometimes an error meassge occure - re-installing the cartridge does solve the problem

All in all no major problems but I'm not a fan of this one because the overall performance is weak compared to other low end stuff like brother.

You can't see the SU6 but the SU6 requires the network card so if you cant see a NIC it won't have the SU6. The standard connectivity port is USB (GDI printing/TWAIN Scan).

Schöne Grüße^^

[Hansoon]

	Quote:			Originally Posted by Jan Sommer
	. Schöne Grüße^^

Danke Jan, schöne Grüße für Dich auch.

Hans

[lvangsnes]

Run as fast as you can from the Di 1610s. They are the second worst copier KonicaMinolta ever put into the market; the Di 151 being the worst in recent years, that is.

[DadO]

My mistake my mistake! I mean on di1611! not 1610!

My mistake again

[Hansoon]

	Quote:			Originally Posted by lvangsnes
	Run as fast as you can from the Di 1610s. They are the second worst copier KonicaMinolta ever put into the market; the Di 151 being the worst in recent years, that is.

So what are the issues?

Hans

[ni311]

DI1610 / BH160 are better compared with DI151 or PP series. But there are a few problems, as Jan described very well. In my opinion they are not so worst, it depends what you will do with it. Don't ask too much from it and it will work ok.