bizhub C10 scan to email set up

[Brett GS]

Hi all.
Could some one please guide me through the setting up of a bizhub c10 scan to email,i havent had to do it until now and not 100% sure of where to start.

Regards
Brett

[JSC]

Log on to the web interface using the password:-MagiMFP.
Click on the yellow network tab, then on the left hand side select Email.
Make sure 'send' in enabled, enter a sender name, enter an Email address ( this is what will appear in the inbox as the sender )., enter a default subject, enter the smtp server address. click apply and give it a go.

PS you may or may not have to enter authentication info most don't it depends on the system the customer is running.

Good luck

[Brett GS]

	Quote:			Originally Posted by JSC
	Log on to the web interface using the password:-MagiMFP. Click on the yellow network tab, then on the left hand side select Email. Make sure 'send' in enabled, enter a sender name, enter an Email address ( this is what will appear in the inbox as the sender )., enter a default subject, enter the smtp server address. click apply and give it a go. PS you may or may not have to enter authentication info most don't it depends on the system the customer is running. Good luck

Will give it a go,thakns for the help,much appreciated.