Minolta C3102

[digicor]

How do I re set the fuser and transport roller unit to trip the machibne so i can re use the units? I have been told this can be done to get a second use out of them.
THanks

[10871087]

the units are fused. I forget what size they are.

[jjw23]

yes there is a fuse on both of them you need to replace. On the fuser you have to take it apart carefully to get to the fuse which is covered by black tape. Then the transfer belt has a small bulb fuse that is behind a small panel, very easy to find.

[digicor]

what size is the fuse? I found it , is it the 1/8 pico fuse i use in my rebuilds for the dI rebuilds?

[jjw23]

i use the 1/16 green fuse from newark sku 12J4187

[digicor]

thank you
i appreaciate the help.

[jjw23]

oh and make sure to soder it on, so it has a good connection.