Konica Minolta C450

[Vesigoth]

I'm getting a C1183 code on this machine. Any ideas on what this means and how to clear it will be appreciated.

[ni311]

C1183
Finishing option Elevator drive malfunction

[Vesigoth]

Thanks ni311. I just opened the front door powered down and it reset the code and now working again. Thanks again.

[fixthecopier]

Check the top tray on the finisher. If it is not screwed in properly someone could bump into it, knocking it slightly out of place. This would cause the elevator to over travel, because there is a switch on the side of the elevator, that the tray actuates to make it stop moving.

[Vesigoth]

Thanks for the headsup fixthecopier. Good charicature of Nixon.