Hi my friends,
Does anybody try to install df-624 to c454?
My df-701 is dead and I'm f for cheaper solution.
Hi my friends,
Does anybody try to install df-624 to c454?
My df-701 is dead and I'm f for cheaper solution.
Silly question but you did enable it in service mode yea?
Sent from my VTR-L09 using Tapatalk
Just remember to remove the dual scan board and select single sided feeder in tech rep.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
The DF 701 was the standard ADF on this machine..There were no dual scan feeders until you got to the C652 DS and you do not have the option for selecting which ADF in service mode..IMHO (as I would never even think of trying something like this) unless you can pull the wiring diagrams and be sure that at least the power wiring is the same, you may wind up blowing a power supply by doing this. E
The 652 came with a feeder that's why there is no choice.
A 454 though you do.
(it didn't, was thinking the 8 series)
Last edited by Synthohol; 02-06-2021 at 03:27 AM.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Synth I am looking at the installation instructions for the c454..There is no ADF choice for this..It came with the 701 and that's it..I think if you plug in a 624 at best it won't work. The 652 came with a feeder, no choice, the C652 came as single pass or dual scan C652DS, again no choice on the feeders.
Seems to me, a few years ago...we had 3 or 4 that were throwing document feeder codes and it turned out we simply had to re-format the hard drive. I know, I know, it seems a little crazy but it worked. And codes never returned.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks