Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    DF601 indicates jam

    Taminol's Avatar
    Join Date
    May 2007
    Location
    London
    Posts
    148
    Rep Power
    23

    DF601 indicates jam

    Hi guys,

    I have a C250 with a DF601 on it. Everytime the machine is switched on or it comes on from sleep mode the DF indicates there is a jam. I simply open/shut any of the DF doors and the fault goes away. Feeding thru the DF works fine, no reg errors or anything.
    I have tried to do the auto adjustment and reinitialize of the sensors, but they all show NG.
    Am I looking at a main DF board fault, or is there firmware I can flash to it?

    Thanks

    Taminol


  2. #2
    Senior Tech 250+ Posts
    Join Date
    May 2007
    Location
    Wake Forest, NC
    Posts
    313
    Rep Power
    26
    The turnover sensor is dirty or has failed. It is PC5-DF.


  3. #3
    Senior Tech 100+ Posts
    DF601 indicates jam

    Taminol's Avatar
    Join Date
    May 2007
    Location
    London
    Posts
    148
    Rep Power
    23
    Thanks for the info Fash, I'll have a proper look at that sensor tomorrow.
    Cheers
    Taminol


  4. #4
    Senior Tech 100+ Posts
    DF601 indicates jam

    Taminol's Avatar
    Join Date
    May 2007
    Location
    London
    Posts
    148
    Rep Power
    23
    Quote Originally Posted by Flash View Post
    The turnover sensor is dirty or has failed. It is PC5-DF.

    Woohoo, it worked. I changed PC5 and hey presto !!
    Thanks Flash


  5. #5
    redime
    Guest
    Quote Originally Posted by Taminol View Post
    Woohoo, it worked. I changed PC5 and hey presto !!
    Thanks Flash
    Theres the little mirror reflector patch right there - that usually gets dirty. Instruct the keyop to wipe it with a clean finger. Keeps you from coming out next time.


  6. #6
    Junior Member
    Join Date
    Sep 2015
    Posts
    1
    Rep Power
    0

    Re: DF601 indicates jam

    Hi,

    Thank you very much, just finished ! The sensor was good but the little mirror was dirty. Immediately after reassembling i've tried to reproduce the error, so after the KM logo i had the error before and not anymore after cleaning the mirror. It is now the same for sleep mode.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •