Thanks:
0
Likes:
0
Dislikes:
0
-
these machines are different then the 3510 series. then the drum was due you could go into the counter mode and just zero them out. I tried to on a bizhub 350 and the thing gave me the atdc code. minolta just reccomends that you replace the developer and drum unit together. or it will not work. at least it did not work in my instance. so if you want to cause a big problem just replace the drum unit. I think that if you just clear out the numbers and do an f8 this machine will outsmart you. let us know how you do on this. ok?
brent
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Re: bizhub 250 b/w C2557
If you forgot to clear the counter before replacing of the developer then you have to open the ADU door, turn ON the machine, go to the Service mode, clear the consumables counter, run F8. Thats it. Hopefuly it's OK. Cheers
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks