If you move the EMMc end the EEPROM then you only really need to start with firmware if the version don't match no need for the reset tool.
If you move the EMMc end the EEPROM then you only really need to start with firmware if the version don't match no need for the reset tool.
Whatever
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Good to know
it is a long, delicate and high-risk process.
Have all the necessary fws on hand. I think it's 05 Fw. After using the reset tool, the board to be used will be considered new, so follow the steps for a new board.
I only did this once in Series 8. I was successful.
But before that, it went very wrong and took me 03 days
Nothing like day after day
Thank y'all for the input and suggestions, guess we're kind of the same page here that it's worth a try. I'll keep you on the loop.
On some Machines it works, on some it does not. Has nothing to do with firmware i think because i keep them updated. Could be possible installed i-options or different product-revisions that hinder the reset tool from working. Have not done enough testing on it because it happened like 10 times so far
Bookmarks