Hey Guys,
Sorry I have been away had to abandon the above problem. I am back and trying resolve the issue. I have the cf910 and i am able to copy in black but color is comming out spotty. The colors are not mixing but are just small blobbs. On the machine I have 2 messages P-2 NG and P-4 NG. I have the manual and I am trying address the issues. The manuall suggests several possibilities and as an unexperienced person I don't know which way to go. I cleaned the sensors ATDC and AIDC and Un22. I tried to do the gradation adjust but I get it to print and when it does the adjustment it freezes after a few scans. I also ran the ATDC sensor Adjust (auto) with the result ->C NG (what does this mean Cyan ATDC sensor needs replacing) I have pictures and copies if some one would like to have a closer look Send me you e-mail and I will email them to you. You help is appreciated. thx