Bizhub c754 Data is being processed after data recovery

[Markks]

I have a couple of donor c754 units. Could I use an ssd board from one of them to fix this? When we ran self diagnostics it shows pattern error on ssd

NO

[mrfuser]

Ok. I got it past data recovery and can make a copy off the glass but it won’t recognize the hdd or the adf. I have tried another drive and when I hit logical format in service mode it goes to 0% and never goes above that. Tried a couple of different drives. Any more ideas?

[copyman]

I've swapped MFP boards from one 4 series to another with no issues. Just need to cleanse the board first (see attached). Also have used SSD with the MFP from another machine.

[copyman]

Ok. I got it past data recovery and can make a copy off the glass but it won’t recognize the hdd or the adf. I have tried another drive and when I hit logical format in service mode it goes to 0% and never goes above that. Tried a couple of different drives. Any more ideas?

Have you tried to load previous F/W version? Did you try a physical format on HDD?

[mrfuser]

I don’t have a previous version. Does anyone have one? Some reason site only has a new version that changes from 4 to 4e and I think that’s the issue. Anyone can send me an older 4 version?

[copyman]

I don’t have a previous version. Does anyone have one? Some reason site only has a new version that changes from 4 to 4e and I think that’s the issue. Anyone can send me an older 4 version?

PM me email.