Fiery S300 with remote connection

wwandrei · 03-09-2009

Hello. I have a minolta cf 5001 with the fiery s300 controller. I would like to know how can I activate the remote connection so I can remotely control the fiery? Is there a software update or what is the procedure. I have 2 copiers both with S300 controller and one of them has Remote Control enable so i can connect remotely to it and controll the print jobs, run setup (it runs an embaded version of windows xp) Any help? Thank you!

ni311 · 03-09-2009

It should be in Server Setup.

ivovb · 03-09-2009

If my memory serves me well, this controller have to has connectors for monitor, keyboard and mouse. So you can set-up rdp on it like regular pc.

BR

kmcopier · 03-09-2009

Do you have the faci kit (monitor,keyboard,mouse) ? if you don't have it then there a patch for enable the remote desktop.
Also if you have the faci kit the RDS is disabled and withsome pc backgorund you can do it in the registry.
If you want the patch please send my an PM.

GR kmcopier

wwandrei · 03-10-2009

Thank you all for replying. I don`t hava a faci kit and if put on the fiery monitor/ keyboard/ mouse it starts loading system and i can select from a list 2 options 1. windows embanded; 2. windows embanded[VGA MODE]; but either of options I choose it will display nothing when it soposed to enter the Operating System. I soppose it`s because of faci kit.

kmcopier · 03-10-2009

yes you see only some seconds on the screen and then it turns off Faci kit. check your PM

xcopy · 03-11-2009

You need to download Fiery command workstation from the konica wesite
once downloaded you will need to configure with the IP address of the machine. Command workstation should also come on a disk with the Fiery.

wwandrei · 03-11-2009

	Quote:			Originally Posted by xcopy
	You need to download Fiery command workstation from the konica wesite once downloaded you will need to configure with the IP address of the machine. Command workstation should also come on a disk with the Fiery.

I have command workstation, I can download it from fiery webtools (Installer > driver, commandworkstation). The idea was to enable remote conection so i don`t have to install cwstation on all my computers that uses the printer. thank`s for replay!