Konica/Minolta Board Repair

[Tata]

Does anybody know where I can send boards for repair, other than Konica, that is cheap fast and good? Thanks. Any info will help.

[brent]

I have had good luck with hytec repair

www.hytecrepair.com

I hope that link works.

they can send out boards in advance exchange as well


brent

[Raymondd]

I've used Hytec before (years ago). They were pretty good. Here's a link...

Circuit Board Repair by Hytec Dealer Services, Inc.

[Tata]

Thanks for the info. I used them before but they screwed up with one order and I haven't use them since. I guess I'll try them again.

[HB_AL]

why not do a certificate in electronics so you then can repair a board for the cost of a cuppa coffee, might take some time but is well worth it

[Tata]

Over the years I have repaired many boards on the old models, now is more complicated because the new boards require more sofisticated equipment to find the components that have failed. I have a degree in electronics, but it is almost impossible to find the components you need, if you were to find them. They also use robots to solder most of these boards. I rather have the guys that have all the equipment do it for me. Thanks anyway.